DriSteem Vapor-Logic Troubleshooting Guide download pdf (Page 52)

1BHFt%3*45&&.7BQPSMPHJD*OTUBMMBUJPOBOE0QFSBUJPO.BOVBM

The Alarms menu displays system alarms. Using the keypad/

display, go to the Alarms menu by pressing the Alarms softkey

(which will be flashing if there is an Alarm), or by pressing the

Home softkey and then the Alarms softkey. Using the Web

interface, click on the View Alarms link in the upper left corner of

any screen.

System alarms are listed in the Alarms Log. The Alarms Log

displays the alarm name, date and time of occurrence, plus

whether the alarm is active, has been cleared by an operator, or

auto-cleared by Vapor-logic4. The Alarms Log lists active alarms

at the top of the list, followed by cleared alarms. The Alarms Log

holds 30 alarms. As alarms are cleared, they move down the list

below active alarms. When the Alarms list reaches 30 alarms, new

alarms add to the top of the list and the oldest, cleared alarms leave

the list. Alarm information is retained in nonvolatile memory if

the Vapor-logic4 board loses power.

See Table 49-1 for alarms and their descriptions

Alarm causes and recommended actions are listed in the

troubleshooting section in this manual.

"MBSNTTDSFFO

Figure 48-1:

Keypad/display screens

MAIN

CLEAR

1/2 A

ALARMS

INFO

miswired

Water probes

Manually cleared

02-02-2008 12:23

Figure 48-2:

Vapor-logic4 Web interface Alarms screen

Press the ALARM softkey

when flashing, or select

Alarms from the Main menu

to view the Alarms Log.

Operation

MAIN MESSAGE

ALARM

212˚F

SET PTSPACE RH

OUTPUT

59%

Fillin

MODE: Auto

35%

34%

TANK A

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 103 104

Comments to this Manuals

No comments

DriSteem Vapor-Logic Troubleshooting Guide Page 52

Comments to this Manuals

Related products and manuals for Dehumidifiers DriSteem Vapor-Logic