DriSteem Vapor-logic3 Operations Instructions download pdf (Page 33)

Main menu: 2) Control Modes.

Operation

Control Modes

In the Control Modes screen, the operational mode of

the humidifier can be set. You may choose from auto,

test, manual drain or standby.

In Auto Mode, the humidifier operates normally. All

inputs and outputs are monitored and controlled. If

there is a call for humidification, the system will

react.

In Test Mode, the controller sequentially cycles

through all outputs so that their operation may be

confirmed. Once all outputs have been cycled on and

off, the controller reverts to the Standby Mode.

In Manual Drain Mode, the automatic drain valve

(if so equipped) is opened and the tank is drained. All

humidifier operation is suspended and the drain valve

is held open until the unit is taken out of Manual

Drain Mode.

In Standby Mode, the humidification system is

taken off line. All humidity control inputs are

displayed but not acted upon.

To select a new mode, use the vertical arrow keys to

move the selection pointer on the left hand side of the

screen up or down. When the pointer is positioned

next to your new selection, press the Enter key. Your

new selection will now appear as inverted text.

Note that the current mode of the humidifier is

always shown as inverted text on this screen.

Operation:

Main menu: 2) Control Modes

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 74 75

No comments

DriSteem Vapor-logic3 Operations Instructions Page 33