DriSteem HUMIDI-TECH DI Installation Guide Page 52
- Page / 108
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
1BHFt%3*45&&.7BQPSMPHJD
3
Installation and Operation Manual
Humidifier tanks ordered as a multi-tank group are configured at
the factory. The configuration process includes:
t "TTJHOJOHMFUUFSOBNFTUPUBOLT
t "TTJHOJOHQSJPSJUZHSPVQOVNCFST
t $POGJHVSJOHUIFNBTUFSDPOUSPMMFS
The instructions below describe this process for you to use if you
need to reconfigure an existing tank for operation in a multi-tank
group.
Multi-tank configuration process
1. Power on the first humidifier to be configured, or if all
humidifiers are already on, remove the LonTalk connections
between the humidifiers. This insures that the user knows
which humidifier is being configured (the display will only
be able to talk to the humidifier it is attached to without the
LonTalk connections between humidifiers) and can be labeled
accordingly.
2. If not already in the Main Menu, press the Main button on the
display.
3. In the Main Menu scroll to item 6) MT Status and push the
Enter button.
4. If this is the first tank configured, all other tanks should be
either off or disconnected as described in Step 1; there should
be only one tank available in the Multitank Status screen named
“1” (see Figure 52-1 on Page 52). If this is an additional tank in
the system, push the Next button until you come to the new “1”
tank. Press the Mk Host button to have the display communicate
with the new tank. The Main Menu will be reloaded and the
display will be communicating with the new tank.
5. Wait for the clock to appear in the upper right corner of the
Main Menu and then scroll to item 4) Set Up and push the Enter
button.
6. Push the Next button until you come to the Configuration String
screen (see Figure 48-1).
7. The third digit of the configuration string needs to be changed
to a letter. The letter must be unique in the group—that is, there
can be only one “A” and only one “B,” etc. After you change the
tank name using the configuration string, the display continues
Multiple tank configurations:
Configuring humidifier tanks
Figure 48-1:
System Set Up screen
Important:
Information on this page applies to
Vapor-logic
3
firmware versions 5.x.x
and 7.x.x only (systems with multi-tank
capability).
“A” indicates tank name/address
“1” indicates tank priority group
VL3_IOM.pdf 52 11/19/2009 9:11:14 AM
- Vapor-logic 1
- Table of contents 3
- 1SPEVDUPWFSWJFX 5
- Summary of features 6
- Control input signals 7
- board receives a linear 8
- 51NPEVMBUJPO 9
- SSR modulation 10
- 7BMWFBOECVSOFSNPEVMBUJPO 11
- XBUFSNPEFMT 12
- *OTUBMMJOHUIFLFZQBEEJTQMBZ 14
- Figure 11-1: 15
- Figure 13-1: 17
- controller. The 18
- Figure 15-1: 19
- GTS expansion board 19
- 3 main controller 20
- main controller 21
- Installation checklist 22
- Typical installation 23
- (FOFSBMXJSJOHQSPDFEVSFT 24
- (FOFSBMXJSJOHQSPDFEVSFT 25
- Control cabinet connections 26
- 4FOTPSEFWJDFQMBDFNFOUBOE 29
- IVNJEJUZDPOUSPMPWFSWJFX 29
- 8JSJOHTFOTPSEFWJDFT 30
- Installation: Wiring detail 31
- Figure 28-1: 32
- VAV transmitter wiring 32
- Figure 29-1: 33
- Figure 30-1: 34
- Figure 31-1: 35
- YYPOMZ 36
- Important: 37
- Connecting LonTalk 39
- Connecting LonTalk, continued 40
- -PO5BML/FUXPSLWBSJBCMFBOE 42
- Table 39-1: 43
- OWPDPOUJOVFE 44
- OWP%JHJUBM@*0 45
- Introduction 46
- Multiple tank configurations: 47
- 1SJPSJUZHSPVQT 47
- Installation 49
- Multi-tank status screen 50
- 6TJOHUIFLFZQBEEJTQMBZ 51
- Configuring humidifier tanks 52
- Using the keypad 56
- Using the keypad, continued 57
- .FOVTUSVDUVSFPWFSWJFX 58
- Main menu: Idle screen 60
- Idle screen status messages 61
- Main menu: Status screen 62
- Main menu: Alarms screen 64
- Fault messages 65
- Fault messages, continued 66
- Table 63-1: 67
- Set Up menu information 67
- Main menu: Set Up screen 68
- Adjusting set point 69
- 1*%UVOJOH 70
- 1*%UVOJOHDPOUJOVFE 71
- controller. Users 75
- can be field 77
- Table 74-1: 78
- Main menu: Diagnostics screen 82
- Main menu: Reports screen 83
- Start-up checklist 85
- Start-up checklist, continued 86
- Troubleshooting introduction 88
- Troubleshooting guide 100
- Replacement parts 105
- DRI-STEEM Vapor-logic 107
- Two-year Limited Warranty 108
- Extended warranty 108
Related products and manuals for Dehumidifiers DriSteem HUMIDI-TECH DI
Dehumidifiers DriSteem GTS Specifications
(36 pages)
(36 pages)
Dehumidifiers DriSteem XT Specifications
(64 pages)
(64 pages)
© 2020, manymanuals.com. All rights reserved. | 1.864 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals